Commands – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 511

Multi-Service IronWare Routing Configuration Guide
483
53-1003033-02
Commands
Syntax: show ipv6 interface
Commands
The following commands support the features described in this chapter:
•
•
Brocade# show ipv6 interface ethernet 2/1
Interface Ethernet 2/1 is up, line protocol is up
IPv6 is enabled, link-local address is fe80::224:38ff:fe90:e430 [Preferred]
Global unicast address(es):
7:7:7::1 [Preferred], subnet is 7:7:7::/64
7:7:7:: [Anycast], subnet is 7:7:7::/64
Joined group address(es):
ff02::1:ff00:1
ff02::1:ff00:0
ff02::1:ff90:e430
ff02::2
ff02::1
Port belongs to VRF: default-vrf
MTU is 1500 bytes
ICMP redirects are disabled
ND DAD is enabled, number of DAD attempts: 3
ND reachable time is 30000 Milliseconds
ND advertised reachable time is 0 seconds
ND retransmit interval is 1000 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND next router advertisement will be sent in 258 seconds
ND router advertisements live for 1800 seconds
No Inbound Access List Set
No Outbound Access List Set
IPv6 RPF mode: None IPv6 RPF Log: Disabled
RxPkts: 0 TxPkts: 63
RxBytes: 0 TxBytes: 12010
IPv6 unicast RPF drop: 0
IPv6 unicast RPF suppressed drop: 0
ND6 RA DNS Attributes
ipv6 nd ra-dns-server 11::1176 lifetime 176
ipv6 nd ra-dns-server 11::11 lifetime 200
ipv6 nd ra-domain-name abc.com.abb lifetime 150
ipv6 nd ra-domain-name abc-aaa.com lifetime 199
ipv6 nd ra-domain-name abc.com lifetime 200
Brocade#