Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 638)

610 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
show ip bgp vpnv6 routes
Examples The following example displays BGP4+ VPNv6 route information:
Brocade#(config-mpls-if-e1000-2/5)#show ip bgp vpnv6 routes
Total number of BGP Routes: 4
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
S:SUPPRESSED F:FILTERED s:STALE
Prefix Next Hop MED LocPrf Weight Status
Route Distinguisher: 1:1
1 10::41/128 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH:
2 30::/64 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH:
3 40::/64 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH:
4 100::/64 ::FFFF:40:0:0:2 3 100 0 I
AS_PATH:
History
Related
Commands
show ip bgp vpnv6 neighbors
show ip bgp vpnv6 tags
show ip bgp vpnv6 summary
LocPrf The degree of preference for this route relative to other routes in the local AS. When
the BGP4+ algorithm compares routes on the basis of local preferences, the route
with the higher local preference is chosen. The preference can have a value from 0 –
4294967295.
Weight The value that this route associates with routes from a specific neighbor. For example,
if the Brocade device receives routes to the same destination from two BGP4
neighbors, the device prefers the route from the neighbor with the larger weight.
Status The route’s status. Refer to “Status” .
Output field Description
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced.