beautypg.com

Displaying ipv6 is-is memory usage – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual

Page 765

background image

Multi-Service IronWare Routing Configuration Guide

737

53-1003033-02

Displaying IPv6 IS-IS information

Displaying IPv6 IS-IS memory usage

To display information about IPv6 IS-IS memory usage, enter the following command at any level of
the CLI.

Next IS-IS LAN Level-1 Hello

Number of seconds before next Level-1 Hello message will be transmitted by
the device.

Next IS-IS LAN Level-2 Hello

Number of seconds before next Level-2 Hello message will be transmitted by
the device.

Number of active Level-1
adjacencies

The number of ISs with which this interface has an active Level-1 adjacency.

Number of active Level-2
adjacencies

The number of ISs with which this interface has an active Level-2 adjacency.

Circuit State Changes

The number of times the state of the circuit has changed.

Circuit State Adjacencies
Changes

The number of times an adjacency has started or ended on this circuit.

Rejected Adjacencies

The number of adjacency attempts by other ISs rejected by the device.

Circuit Authentication Fails

The number of times the device rejected a circuit because the authentication
did not match the authentication configured on the device.

Bad LSP

The number of times the interface received a bad LSP from an IS at the other
end of the circuit. The following conditions can cause an LSP to be bad:

Invalid checksum

Invalid length

Invalid lifetime value

Control Messages Sent

The number of IS-IS control PDUs sent on this interface.

Control Messages Received

The number of IS-IS control PDUs received on this interface.

IP Enabled

The state of IP on the interface, which can be one of the following:

TRUE – IP is enabled.

FALSE – IP is disabled.

IP Address and Subnet Mask

The IP address(es) and sub-net masks configured on this interface.

IPv6 Enabled

The state of IPv6 on the interface, which can be one of the following:

TRUE – IPv6 is enabled.

FALSE – IPv6 is disabled.

IPv6 Address

The IPv6 address(es) configured on this interface.

TABLE 155

IPv6 IS-IS interface information (Continued)

This field...

Displays...

Brocade# show ipv6 isis memory

Total Static Memory Allocated : 1333 bytes

Total Dynamic Memory Allocated : 157952 bytes

Memory Type Size Allocated Max-alloc Alloc-Fails

MTYPE_ISIS_IP6_SUMMARY_PR 0 0 0 0

MTYPE_ISIS_OTHER 20 0 1 0

MTYPE_ISIS_IP6_ROUTE_NODE 21 22 1024 0

MTYPE_ISIS_IP6_ROUTE_INFO 12 17 1024 0

MTYPE_ISIS_IP6_NEXTHOP 24 2 256 0

MTYPE_ISIS_IP6_REDIS_ROUT 12 5 256 0