beautypg.com

Displaying the is-is spf log – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual

Page 338

background image

310

Multi-Service IronWare Routing Configuration Guide

53-1003033-02

Displaying IPv4 IS-IS information

Displaying the IS-IS SPF Log

The show isis spf-log command displays the ISIS Log, as shown in the following.

Syntax: show isis spf-log {detail | level-1 [detail] | level-2 [detail] }

This display shows the following information.

TABLE 49

IS-IS SPF log information

This field...

Displays...

When

When (in hours: minutes : seconds) a full SPF calculation occurred. The
last 20 occurrences are logged.

Duration

The time required to complete this SPF run, Elapsed time is normal clock
time (not CPU time). Other options for this field are:

Running – the SPF is still running and the duration will be updated
after the SFP has run.

Pending – the event is pending and another SPF will be run once
the currently executing SPF has completed.

Nodes

The number of routers and pseudonodes (LANs) that make up the
topology calculated in this SPF run.

Count

The number of events that triggered this SPF run. When a topology
change has occurred, multiple link-state packets (LSPs) are received in a
short time. Since a router waits about 5 seconds before running a full
SPF run, it can include all new information. This count includes the
number of events (such as receiving new LSPs) that occurred while the
router was waiting the 5 second interval before running full SPF.

Brocade#show isis spf-log detail

ISIS Level-1 SPF Log

When Duration Nodes Count Last-Trigger-LSP Trigger

0h1m57s 0 3 2 mu1.00-00 Adjacency Change

Ipv4 Route updates: 4000 Ipv6 Route updates: 0

First Trigger: 0h1m45s Adj TLV Changed in LSP mu2.00-00

Last Trigger : 0h1m45s Adj TLV Changed in LSP mu1.00-00

0h2m3s 0 3 2 mu2.00-00 New LSP

Ipv4 Route updates: 4000 Ipv6 Route updates: 0

First Trigger: 1h42m45s Adjacency mu2 is added

Last Trigger : 1h42m45s New LSP mu2.00-00 Appeared in database

0h2m9s 0 0 3 mu1.00-00 New LSP

Ipv4 Route updates: 4000 Ipv6 Route updates: 0

First Trigger: 1h42m45s Interface ve 3 is Up

Last Trigger : 1h42m45s New LSP mu1.00-00 Appeared in database

1h5m12s 0ms 0 1 XMR16.00-00 ISTCT_SPF Computation

ISIS Level-2 SPF Log

When Duration Nodes Count Last-Trigger-LSP Trigger

0h2m9s 0 0 3 mu1.00-00 New LSP

Ipv4 Route updates: 4000 Ipv6 Route updates: 0

First Trigger: 1h42m45s Interface ve 3 is Up

Last Trigger : 1h42m45s New LSP mu1.00-00 Appeared in database

0h2m21s 0 0 6 mu1.00-00 New LSP

Ipv4 Route updates: 4000 Ipv6 Route updates: 0

First Trigger: 1h42m45s Interface eth 1/1 is Up

Last Trigger : 1h42m45s New LSP mu1.00-00 Appeared in database

0h3m21s 0 0 3 mu1.00-00 Adjacency Change

Ipv4 Route updates: 4000 Ipv6 Route updates: 0

First Trigger: 1h42m45s New LSP mu1.00-00 Appeared in database

Last Trigger : 1h42m45s Adj TLV is Changed in LSP mu1.00-00