Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 507)

Multi-Service IronWare Routing Configuration Guide 479
53-1003033-02
Displaying global IPv6 information
mem query The number of Group Membership Query messages sent or received by the
device.
mem report The number of Membership Report messages sent or received by the device.
mem red The number of Membership Reduction messages sent or received by the
device.
router soli The number of Router Solicitation messages sent or received by the device.
router adv The number of Router Advertisement messages sent or received by the device.
nei soli The number of Neighbor Solicitation messages sent or received by the device.
nei adv The number of Router Advertisement messages sent or received by the device.
redirect The number of redirect messages sent or received by the device.
Applies to Received Only
bad code The number of Bad Code messages received by the device.
too short The number of Too Short messages received by the device.
bad checksum The number of Bad Checksum messages received by the Brocade device.
bad len The number of Bad Length messages received by the device.
nd toomany opt The number of Neighbor Discovery Too Many Options messages received by the
device.
badhopcount The number of Bad Hop Count messages received by the device.
Applies to Sent Only
error The number of Error messages sent by the device.
can not send error The number of times the device encountered errors in ICMP error messages.
too freq The number of times the device has exceeded the frequency of sending error
messages.
Applies to Sent Errors Only
unreach no route The number of Unreachable No Route errors sent by the device.
admin The number of Admin errors sent by the device.
beyond scope The number of Beyond Scope errors sent by the device.
address The number of Address errors sent by the device.
no port The number of No Port errors sent by the device.
pkt too big The number of Packet Too Big errors sent by the device.
source address policy The number of ICMPv6 destination unreachable messages sent with code 5
because an IPv6 packet is dropped by an Access Control policy and the IPv6
source address of a packet matches the source address filtering policy.
reject route The number of ICMPv6 destination unreachable messages sent code 6
because an IPv6 packet is dropped due to the destination address in the
packet matching a route that has been configured to drop the packet.
time exceed transit The number of Time Exceed Transit errors sent by the device.
time exceed reassembly The number of Time Exceed Reassembly errors sent by the device.
param problem header The number of Parameter Problem Header errors sent by the device.
TABLE 90 IPv6 traffic statistics fields (Continued)
This field... Displays...