Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 492)

464 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying global IPv6 information
Displaying interface counters for all ports
Previous versions of the Multi-Service IronWare software support IPv4 and IPv6 packet and byte
counters. The contents of these counters can be displayed for all ports on a device or per port.
Output from the show ipv6 interface ethernet command includes packet and byte counter
information on a per-port basis. Refer to
“Displaying IPv6 interface information for a specified
interface” on page 463.
The default byte counters include the 20-byte per-packet Ethernet overhead. You can configure a
device to exclude the 20-byte per-packet Ethernet overhead from byte accounting using the
vlan-counter exclude-overhead command.
IPv4 and IPv6 commands display the interface counters for all ports on a Brocade device. The
following example displays packet and byte counter information for all ports.
Brocade# show ipv6 interface counters
Interface RxPkts TxPkts RxBytes TxBytes
eth 3/3 200 200 850000 850000
eth 3/4 500 500 40000 40000
Syntax: show ipv6 interface counters
Table 81 describes the fields that display interface counter statistics.
ICMP The setting of the ICMP redirect parameter for the interface.
ND The setting of the various neighbor discovery parameters for the
interface.
Access List The inbound and outbound access lists applied to the interface.
Routing protocols The routing protocols enabled on the interface.
RxPkts The number of packets received at the specified port. This field supports
IPv4 and IPv6 packet and byte counters.
TxPkts The number of packets transmitted from the specified port. This field
supports IPv4 and IPv6 packet and byte counters.
RxBytes The number of bytes received at the specified port. This field supports
IPv4 and IPv6 packet and byte counters.s
TxBytes The number of bytes transmitted from the specified port. This field
supports IPv4 and IPv6 packet and byte counters.
TABLE 81 Interface counter display statistics
This field... Displays...
Interface The interface for which counter statistics are being displayed.
RxPkts The number of packets received at the specified port.
TxPkts The number of packets transmitted from the specified port.
RxBytes The number of bytes received at the specified port.
TxBytes The number of bytes transmitted from the specified port.
TABLE 80 Detailed IPv6 interface information fields
This field... Displays...