Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 504)

476 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying global IPv6 information
TABLE 89 Specific IPv6 TCP connection fields
This field... Displays...
TCB = location The location of the TCB.
local-ip-address local-port-number
remote-ip-address remote-port-number state port This field provides a general summary of the following:
•
The local IPv4 or IPv6 address and port number.
•
The remote IPv4 or IPv6 address and port number.
•
The state of the TCP connection. For information on
possible states, refer to
Table 88 on page 474.
•
The port numbers of the local interface.
Send: initial sequence number = number The initial sequence number sent by the local device.
Send: first unacknowledged sequence number =
number The first unacknowledged sequence number sent by the
local device.
Send: current send pointer = number The current send pointer.
Send: next sequence number to send = number The next sequence number sent by the local device.
Send: remote received window = number The size of the remote received window.
Send: total unacknowledged sequence number =
number The total number of unacknowledged sequence numbers
sent by the local device.
Send: total used buffers number The total number of buffers used by the local device in
setting up the TCP connection.
Receive: initial incoming sequence number =
number The initial incoming sequence number received by the local
device.
Receive: expected incoming sequence number =
number The incoming sequence number expected by the local
device.
Receive: received window = number The size of the local device receive window.
Receive: bytes in receive queue = number The number of bytes in the local device receive queue.
Receive: congestion window = number The size of the local device receive congestion window.