Displaying bgp4 restart neighbor information, Displaying as4 details, Displaying bgp4 – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 171: Restart neighbor information, Route entries with four-byte path information, Current as numbers
Multi-Service IronWare Routing Configuration Guide
143
53-1003033-02
Displaying BGP4 information
Displaying BGP4 restart neighbor information
To display BGP4 restart information for BGP4 neighbors, enter the show ip bgp neighbors
command.
The text in bold is the BGP4 restart information for the specified neighbor.
Displaying AS4 details
This section describes the use of the following show commands, which produce output that
includes information about AS4s. Information that reflects AS4s appears in bold.
•
show ip bgp neighbor shows whether the AS4 capability is enabled.
•
show ip bgp attribute-entries shows AS4 path values and extended community values.
•
show ip bgp shows the route entries with two and AS4 path information.
•
show ip extcommunity-list shows the members of the extended community.
•
show route-map shows the presence of any AS4 configuration data.
•
show ip as-path-access-lists shows the presence of any AS4 configuration data.
•
show ip bgp config shows the presence of any AS4 configuration data.
Route entries with four-byte path information
The show ip bgp command without of any optional parameters display AS4 path information, as
indicated by the bold text in this example.
Syntax: show ip bgp
Current AS numbers
To display current AS numbers, use the show ip bgp neighbors command at any level of the CLI.
Brocade# show ip bgp neighbors
Total number of BGP Neighbors: 6
1 IP Address: 10.50.50.10, AS: 20 (EBGP), RouterID: 10.10.10.20, VRF: default
State: ESTABLISHED, Time: 0h0m18s, KeepAliveTime: 60, HoldTime: 180
KeepAliveTimer Expire in 34 seconds, HoldTimer Expire in 163 seconds
Minimum Route Advertisement Interval: 0 seconds
RefreshCapability: Received
GracefulRestartCapability: Received
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 0
GracefulRestartCapability: Sent
Restart Time 120 sec, Restart bit 0
afi/safi 1/1, Forwarding bit 1
Messages: Open Update KeepAlive Notification Refresh-Req
....
Brocade# show ip bgp
Total number of BGP Routes: 1
Status codes: s suppressed, d damped, h history, * valid, > best, i internal, S
stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 10.1.1.0/24 192.168.1.5 1 100 0 90000 100 200 65535
65536 65537 65538 65539 75000