Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 493)

Multi-Service IronWare Routing Configuration Guide 465
53-1003033-02
Displaying global IPv6 information
Clearing the interface counters
Use the following command to clear all interface counters on a Brocade device.
Brocade# clear ipv6 interface counters
Syntax: clear ipv6 interface counters
Use the following command to clear the interface counters for a specified port.
Brocade# clear ipv6 interface ethernet 3/2
Syntax: clear ipv6 interface ethernet port-number
The port-number variable specifies the slot and port number for which you want to clear the
interface counters.
Displaying IPv6 neighbor information
You can display the IPv6 neighbor table, which contains an entry for each IPv6 neighbor with which
the device exchanges IPv6 packets.
To display the IPv6 neighbor table, enter the following command at any CLI level.