Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 353)

Multi-Service IronWare Routing Configuration Guide 325
53-1003033-02
Displaying RIP Information
Displaying RIP Information
To display RIP filters, enter the following command at any CLI level.
Syntax: show ip rip
See Table 54 on page 326 for display information.
Brocade# show ip rip
RIP Summary
Default port 520
Administrative distance is 120
Updates every 30 seconds, expire after 180
Holddown lasts 180 seconds, garbage collect after 120
Last broadcast 2, Next Update 26
Need trigger update 0, Next trigger broadcast 3
Minimum update interval 25, Max update Offset 5
Split horizon is on; poison reverse is off
Import metric 1
Prefix List, Inbound : Not set
Prefix List, Outbound : Not set
Route-map, Inbound : Not set
Route-map, Outbound : Not set
Redistribute:
No Neighbors are configured in RIP Neighbor Filter Table