Displaying bgp4+vrf6 nexthop information – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 615

Multi-Service IronWare Routing Configuration Guide
587
53-1003033-02
Displaying BGP4+ information
Displaying BGP4+VRF6 nexthop information
To view BGP4+ VRF6 nexthop information for a specified VRF6, enter the following command.
Syntax: show ipv6 bgp vrf vrf-name nexthop
The vrf-name parameter specifies the VRF6 name whose nexthop information needs to be
displayed.
Table 127
provides information about the command’s output.
RcvNext
The next sequence number expected from the neighbor.
SendWnd
The size of the send window.
TotalRcv
The number of sequence numbers received from the neighbor.
DupliRcv
The number of duplicate sequence numbers received from the
neighbor.
RcvWnd
The size of the receive window.
SendQue
The number of sequence numbers in the send queue.
RcvQue
The number of sequence numbers in the receive queue.
CngstWnd
The number of times the window has changed.
TABLE 127
BGP4+ VRF6 nexthop information
This field...
Displays...
safi
Subsequent address family ID.
Type Codes
Type of route.
OSPF Codes
Type of OSPF route
Next Hop
The next-hop IP address.
Type
Type of route.
Cost
Metric of route.
ResolveSchema
Method to resolve nexthop
Router IP
The router IP address.
Port
The port number of the interface.
TABLE 126
BGP4+ VRF6 neighbor information (Continued)
This field...
Displays...
Brocade#show ipv6 bgp vrf abc nexthop
safi : BGP IPV6 UNICAST SAFI
Type Codes - B:BGP D:Connected I:ISIS L:Local O:OSPF R:RIP S:Static
OSPF Codes - i:Internal 1:External Type 1 2:External Type 2
Next Hop Type Cost ResolveSchema Router IP Port
3:3:3::3 Oi 2 IPv4/6 fe80::200:ff:fe02:0 eth 1/2