Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 167)

Multi-Service IronWare Routing Configuration Guide 139
53-1003033-02
Displaying BGP4 information
Displaying BGP4 route-attribute entries
The route-attribute entries table lists the sets of BGP4 attributes stored in device memory. Each set
of attributes is unique and can be associated with one or more routes. In fact, the device typically
has fewer route attribute entries than routes.
To display the IP route table, enter the following command.
Brocade# show ip bgp attribute-entries
Syntax: show ip bgp attribute-entries
This example shows the information displayed by this command. A zero value indicates that the
attribute is not set.
This display shows the following information.
TABLE 13 BGP4 route-attribute entries information
This field... Displays...
Total number of BGP4 Attribute Entries The number of routes contained in this BGP4 route table.
Next Hop The IP address of the next-hop device for routes that have this set of
attributes.
Metric The cost of the routes that have this set of attributes.
Origin The source of the route information. The origin can be one of the
following:
•
EGP – The routes with these attributes came to BGP4 through EGP.
•
IGP – The routes with these attributes came to BGP4 through IGP.
•
INCOMPLETE – The routes came from an origin other than one of
the above. For example, they may have been redistributed from
OSPF or RIP.
When BGP4 compares multiple routes to a destination to select the best
route, IGP is preferred over EGP and both are preferred over
INCOMPLETE.
Originator The originator of the route in a route reflector environment.
Cluster List The route-reflector clusters through which this set of attributes has
passed.
Aggregator Aggregator information:
•
AS Number shows the AS in which the network information in the
attribute set was aggregated. This value applies only to aggregated
routes and is otherwise 0.
•
Router-ID shows the device that originated this aggregator.
Brocade# show ip bgp attribute-entries
Total number of BGP Attribute Entries: 7753
1 Next Hop :192.168.11.1 MED :0 Origin:IGP
Originator:0.0.0.0 Cluster List:None
Aggregator:AS Number :0 Router-ID:0.0.0.0 Atomic:FALSE
Local Pref:100 Communities:Internet
AS Path :(65002) 65001 4355 2548 3561 5400 6669 5548
2 Next Hop :192.168.11.1 Metric :0 Origin:IGP
Originator:0.0.0.0 Cluster List:None
Aggregator:AS Number :0 Router-ID:0.0.0.0 Atomic:FALSE
Local Pref:100 Communities:Internet
AS Path :(65002) 65001 4355 2548