Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 972)

924 Brocade Network Advisor SAN User Manual
53-1002948-01
VLAN Manager
26
VLAN Manager tabs
VLAN Manager has three views:
• VLAN view
Displays distinct Layer 2 broadcast domains by VLAN ID. If FDP or LLDP is not enabled on a
device, each VLAN from each device is displayed in separate folders by VLAN ID. If FDP or LLDP
is enabled on the devices, a VLAN folder shows device connectivity on the Layer 2 broadcast
domains.
If there are super-aggregated VLANs that have been configured on the network, VLANs are
grouped by their super-aggregated VLAN memberships.
If the VLANs are in different networks, they display as different nodes, even if FDP or LLDP is
not enabled on the device.
• Product view
Displays the VLANs configured on a device. The information is grouped by products. Select a
product to view the VLANs that are on that device.
Displaying VLANs in the VLAN view
The VLAN View tab displays all the VLANs discovered on the network and lists them by VLAN IDs
(
Figure 403 ).
FIGURE 403 VLAN Manager dialog box - VLAN View tab
To view the VLANs or products in the VLAN View tab, complete the following steps.