Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 258)

208 Brocade Network Advisor SAN User Manual
53-1002948-01
Performance monitors
7
Top Port Sync Losses monitor
The Top Port Sync Losses monitor ( Figure 73 ) displays the top ports with synchronization failures in
a table.
FIGURE 73 Top Port Sync Losses monitor
The Top Port Sync Losses monitor includes the following data:
• Severity icon/monitor title — The color of the worst severity of the data shown next to the
monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• Sync Losses — The number of synchronization failures for the port.
• Sync Losses/sec — The number of synchronization failures for the port per second.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Online).
• Status — The port status (for example, In_Sync, No_Sync).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
“Editing a preconfigured performance monitor” on page 220.