Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1433)

1386 Brocade Network Advisor SAN User Manual
53-1002948-01
Database tables and fields
H
VLAN_TAG VLAN Tag of the circuit. The
default value is -1 int
SELECTIVE_ACK Select acknowledgement
flag.The default value is 0. smallint
QOS_MAPPING QOS Mapping.
The default value is 0. smallint
PATH_MTU_DISCOVERY MTU Discovery Path.
The default value is 0.
smallint
MIN_COMM_RATE Minimum communication
Speed. The default value is 0. int
MAX_COMM_RATE Maximum communication
Speed. The default value is 0. int
MIN_RETRANSMIT_TIME Minimum Retransmission
Time. The default value is -1 int
MAX_RETRANSMIT_TIME Maximum retransmission
time. The default value is -1 int
KEEP_ALIVE_TIMEOUT Keep Alive timeout. The
default value is -1 int
ADMIN_STATUS Is admin status enabled.
The default value is 0. smallint
METRIC Circuit metric to set priority.
The default value is -1 int
DATA_L2_COS Class of service as defined by
IEEE 802.1p for circuit. The
default value is -1. int
DSCP_DATA DiffServe marking for Data
Frame. The default value is -1 int
MAX_RETRANSMISSIONS Max number of
Retransmission attempts on
the circuit.
The default value is 0. int
SLOT_NUMBER Slot number of the circuit.
The default value is 0. smallint
VE_PORT_NUMBER VE port number of the tunnel
to which the circuit belongs. int
SECURITY_FLAG Security Flag associated with
the circuit.
The default value is 0. int
DSCP_CONTROL Diffserve marking for control
frame.
The default value is 0. int
CIRCUIT_STATUS Status of the circuit.
The default value is 0. smallint
TABLE 120 FCIP_TUNNEL_CIRCUIT (Continued)
Field Definition Format Size