Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1280)

Brocade Network Advisor SAN User Manual 1233
53-1002948-01
SAN main menus
A
Host Adapters — Select to discover hosts.
VM Managers — Select to discover VM managers.
VCEM Managers — Select to discover Virtual Connect
Enterprise Managers.
Host Port Mapping — (Trial and Licensed version Only)
Select to manually map HBA ports to a host.
Storage Port Mapping — (Trial and Licensed version Only)
Select to manually map Storage Ports to a Storage Device
or other Storage Ports.
Configure Menu
Element Manager — Select to configure the selected
device.
Hardware — Select to launch the Element Manager or
Web Tools application for the selected device.
Ports — Select to launch Web Tools - Port Administration
for the selected device.
Admin — Select to launch Web Tools - Switch Adm in i st
raton for the selected device.
Router Admin — Select to launch Web Tools - FCR
Administration for the selected device.
Name Server — Select to launch Web Tools - Name Server
for the selected device.
HCM — (HBA or CNA only) Select to launch the HCM Agent
for the selected device.
Enable/Disable — Select to enable or disable Virtual
Fabrics, switches, and ports.
Enable — Select to enable Virtual Fabrics, switches, and
ports.
Disable — Select to disable Virtual Fabrics, switches, and
ports.
Allow/Prohibit Matrix. (Enterprise Licensed version Only)
Select to allow FICON users to configure an Allow/Prohibit
Matrix table. You can select any matrix tables and
compare them either vertically or horizontally.
Configuration — Select to manage the selected device.
Save — Select to save device configurations to the
repository.
Save Running to Startup — Select to save the DCB
running configuration to the startup configuration on
selected switches. Requires at least one discovered DCB
switch.
Restore — Select to restore device configurations from
the repository.
Menu Command Command Options