Virtual fabrics, Virtual fabrics overview, Chapter 19 – Brocade Network Advisor SAN User Manual v12.1.0 User Manual
Page 595: Chapter 19, “virtual fabrics
Brocade Network Advisor SAN User Manual
547
53-1002948-01
Chapter
19
Virtual Fabrics
In this chapter
•
•
•
Virtual Fabrics overview
NOTE
Virtual Fabrics requires that you have at least one Virtual Fabrics-enabled physical chassis running
Fabric OS 6.2.0 or later in your SAN.
Virtual Fabrics enables you to divide one physical chassis into multiple logical switches that can be
managed by separate administrators. Logical switches consist of one or more ports that act as a
single FC switch. You can interconnect logical switches to create a logical fabric.
The following lists the benefits of using the Management application to manage Virtual Fabrics:
•
Enables you to view your entire SAN (both physical and virtual) at a glance.
•
Enables you to manage a logical switch the same as a physical switch, so that fewer physical
chassis are required for Management application deployment.
•
Enables you to use a logical switch for discovery and eliminate the requirement for one
physical chassis for each fabric.
•
Enables you to manage multiple Virtual Fabrics-capable physical chassis from the same
interface.
•
Enables you to provide logical isolation of data, control, and management paths at the port
level.
You can easily determine which devices in your SAN are logical switches. Logical switches are
shown with a Virtual Fabrics icon (
) next to the switch icon. For example, in
Figure 193
, Switch_2
is a logical switch.
FIGURE 193
Virtual Fabrics icon in Product List
Before using the Management application to manage Virtual Fabrics, you should familiarize
yourself with Virtual Fabrics concepts, as described in the Fabric OS Administrator’s Guide.