Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 448)

398 Brocade Network Advisor SAN User Manual
53-1002948-01
Ports
12
Fabric The fabric name.
FC Address The Fibre Channel (FC) address of the switch.
FC Port # The FC port number of the switch.
FCIP Capable Whether the switch is FCIP capable or not.
Flag (FICON related) Whether a FICON-related flag is on or off.
Forward Error Correction (FEC) Whether FEC is enabled or disabled.
GE Port # The GE port number of the switch.
InBand Management State Whether inband management is enabled or disabled.
iSCSI Capable Whether the switch is iSCSI capable or not.
L2 Mode Whether the switch is in L2 mode or not.
LAG ID The LAG identifier.
Locked Port Type The port type of the locked product.
Long Distance Setting Whether the connection is considered to be normal or longer
distance.
MAC Address The MAC address of the switch.
Manufacturer The name of the manufacturer.
Manufacturer Plant The name of the manufacturing plant.
Name The name of the switch.
NPIV Enabled Whether the NPIV port is enabled.
Parameter The parameter of the switch.
Physical/Logical Whether the port is a physical port or a logical port.
PID Format The port ID format of the switch.
Port # The port number.
Port Address The address of the port.
Port Module The port’s module.
Port NPIV The number of NPIV ports.
Port Type The type of port.
Port State Whether the port is online or offline.
Port Status Whether the port is enabled or disabled.
Prohibited Whether the port is prohibited.
Protocol The network protocol, for example, Fibre Channel.
RA TOV The resource allocation time out value, in milliseconds, of the
connected switch. This variable works with the E D TOV variable to
determine switch actions when presented with an error condition.
Sequence # The sequence number of the switch.
Serial # The serial number of the switch.
Slot # The slot number of the switch.
TABLE 48 Port connection properties (Continued)
Field Description