Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1242)

Brocade Network Advisor SAN User Manual 1195
53-1002948-01
MAPS groups
34
FIGURE 496 Add Group dialog box
4. Enter a unique name for the group in the Name field.
The name can be up to 32 characters and can only contain of alphanumeric and underscore
characters.
5. Add objects to the group by selecting the object (port or circuit) in the Available Ports/Circuits
area and clicking the right arrow button.
The selected objects move from the Available Ports/Circuits area to the Selected Ports/Circuits
area.
6. Remove objects from the group by selecting the object (port or circuit) in the Selected
Ports/Circuits area and clicking the left arrow button.
The selected objects move from the Selected Ports/Circuits area to the Available Ports/Circuits
area.
7. Click OK on the Add Group dialog box.
The new group displays in the Custom Groups folder of the Rules area.
8. Configure policies and rules for the group. For more information, refer to “Configuring a MAPS
policy” on page 1183.
9. Click OK on the Add Policy dialog box.
10. Click Close on the MAPS Configuration dialog box.