Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 671)

Brocade Network Advisor SAN User Manual 623
53-1002948-01
Steps for connecting to a KMIP-compliant SafeNet KeySecure
20
Creating a cluster
1. From the KeySecure Management Console, select the Device tab, then select Device
Configuration > Cluster.
The Cluster Configuration page displays. (Refer to Figure 228 .)
FIGURE 228 KeySecure Cluster Configuration page
2. Under Create Cluster, enter a user-defined password in the fields provided, then click Create.
The Cluster Configuration page refreshes; the new cluster information is listed in the Cluster
Members table. (Refer to
Figure 229 .)
3. Verify the cluster status is shown as Active.