Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1135)

1088 Brocade Network Advisor SAN User Manual
53-1002948-01
Defining filters
33
Defining filters
The Define Filter dialog box, shown in Figure 454 , allows you to define event filters by product,
event category, and severity. You can define event filters on SAN products, IP products, or hosts.
Setting up basic event filtering
To set up advanced event filtering on the selected events for a user, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Select a user in the Users list and click Edit.
The Edit User dialog box displays.
3. Select the E-mail Notification Enable check box and click the Filter link.
The Define Filter dialog box, shown in Figure 454 , displays.
FIGURE 454 Define Filter dialog box
4. Select which product type you are defining (SAN, IP, or Hosts) and click the appropriate tab.
5. Select the Events Description check box and enter a description of the event in the field.