Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1047)

Brocade Network Advisor SAN User Manual 999
53-1002948-01
Thresholds and event notification
29
FIGURE 422 Threshold example
Creating and editing a threshold policy
To create or edit a threshold policy, complete the following steps.
1. Select Monitor > Fabric Watch > Performance Thresholds.
The Set Threshold Policies dialog box displays, as shown in Figure 423 on page 999.
FIGURE 423 Set Threshold Policies dialog box
NOTE
Policies set for switches enabled for Monitoring and Alerting Policy Suite (MAPS) also display in
this dialog box.
2. To edit a current policy, select a policy form the Available Threshold Policies list and click Edit.
The Edit Threshold Policy dialog box displays, as shown in Figure 424 on page 1000.