Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 83)

Brocade Network Advisor SAN User Manual 33
53-1002948-01
License downgrade
2
5. Choose one of the following options:
• If you configured authentication to CAC, enter your PIN in the CAC PIN field.
• If you configured authentication to the local database, an external server (RADIUS, LDAP,
or TACACS+), or a switch, complete the following steps.
a. Enter your user name and password.
The defaults are Administrator and password, respectively.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
b. Select or clear the Save password check box to choose whether you want the
application to remember your password the next time you log in.
To change your password, refer to
“Changing your password” on page 163.
6. Click Login.
7. Click OK on the Login Banner.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.
License downgrade
You can downgrade from a higher Trial configuration to a licensed version with a lower
configuration.
NOTE
You cannot downgrade to Professional Edition.
NOTE
Downgrading to a Trial version is not supported.
NOTE
You cannot downgrade during migration (Configuration Wizard).
Downgrading the edition
The following table list the available downgrade paths.
TABLE 12 Edition downgrade paths
Current software release To software release
Enterprise SAN + IP Professional Plus SAN + IP
Professional Plus SAN
Enterprise SAN Professional Plus SAN + IP
Professional Plus SAN