Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 174)

124 Brocade Network Advisor SAN User Manual
53-1002948-01
Software Configuration
5
SSH File Transfer Protocol (SFTP) is a network protocol used to transfer data from one computer to
another over a secure channel. You must configure SCP on your machine to support Technical
Support and firmware management.
NOTE
SFTP is supported on Fabric OS devices running 7.0 and later.
The built-in SCP/SFTP servers use the port 22 by default.
To view the port status for the FTP and SCP/SFTP servers, refer to “Viewing port status” on
page 11.
Accessing the FTP server folder
Choose from one of the following options to access the FTP server folder:
• To access the internal FTP folder, select Monitor > Techsupport > View Repository.
• To access the external FTP folder, type the following in a browser window:
ftp://Username@External_FTP_Server_IP_Address
(for example, ftp://[email protected]) and press Enter. Type your password in the pop-up
window and press Enter. The external FTP folder displays.
Configuring an internal FTP server
To configure the internal FTP server settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select FTP/SCP/SFTP in the Category list.
The FTP/SCP/SFTP pane displays ( Figure 41 ).
FIGURE 41 Options dialog box (FTP/SCP/SFTP pane)
3. Select the Use built-in FTP/SCP/SFTP Server option to use the default built-in FTP server.
All active fields are mandatory. The default user name is admin. The full path to the built-in FTP
directory displays in the Root Directory field.
4. Select the Built-in FTP Server check box.
5. Change your password by entering a new password in the Password and Confirm Password
fields.
The default password is passw0rd (where 0 is a zero).