Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1514)

Brocade Network Advisor SAN User Manual 1467
53-1002948-01
Database tables and fields
H
TABLE 313 SMIA_SAN_NAME
Field Definition Format Size
NAME 'This will be the principal switch WWN of the fabric.'; varchar 24
ELEMENT_NAME User friendly name to identify the SAN varchar 32
IS_PRIMARY_FABRIC This value will indicate whether principal switch WWN
has primary ownership or not. In case of simple FC
fabric, the value will be always 1. In case of Meta
SAN, Fabric with highest principal switch WWN will
have primary ownership (value 1) and other fabric
entries within the same SAN will have value as 0. int
TABLE 314 SNAPSHOT_PRODUCT_STATUS
Field Definition Format Size
ID Unique generated database identifier. serial
DEPLOYMENT_STATUS_ID Foreign Key references DEPLOYMENT_STATUS_ID
(id). Identifies the execution cycle for the deployment. int
MANAGED_ELEMENT_ID Associates for which target the status applies to. int
SNAPSHOT_TYPE Indicates the type of snapshot:
•
1-Pre snapshot
•
2-Post snapshot
int
SNAPSHOT_TIME Time when this pre/post snapshot occurred.
MESSAGE Detailed message for snapshot report. text
TABLE 315 SNMP_CREDENTIALS
Field Definition Format Size
ID* Unique generated database identifier. int
VIRTUAL SWITCH_ID Virtual switch ID for which this instance of the SNMP
credentials apply. int
RECIPIENT_ID Recipient in the MESSAGE_RECIPIENT table. int
POR)_NUMBER Port number of the SNMP agent on the switch for get
and set requests. smallint
RETRY_COUNT Number of times to retry if get/set request to the
SNMP agent times out. Default value is 3. smallint
TIMEOUT Timeout value in seconds for a get/set request to the
SNMP agent. Default value is 5. smallint
VERSION SNMP agent version running on the switch, as in
SNMPv1 or SNMPv3. varchar 6
READ_COMMUNITY_
STRING The SNMP Read-Only Community String is like a
password. It is sent along with each SNMP
Get-Request and allows (or denies) access to a
device. The default value is "public". This is applicable
if the agent is configured to operate in SNMPv1. varchar 64