Brocade Network Advisor SAN User Manual v12.1.0 User Manual
Page 1515
1468
Brocade Network Advisor SAN User Manual
53-1002948-01
Database tables and fields
H
WRITE_COMMUNITY_
STRING
The SNMP Write-Only Community String is like a
password. It is sent along with each SNMP
Set-Request and allows (or denies) access to a
device. The default value is "private". This is
applicable if the agent is configured to operate in
SNMPv1.
varchar
64
USER_NAME
A human readable string representing the name of
the user. This is applicable if the agent is configured
to operate in SNMPv3.
varchar
64
CONTEXT_NAME
Text ID associated with the user, used by the SNMP
agent to provide different views. This is applicable if
the agent is configured to operate in SNMPv3.
varchar
128
AUTH_PROTOCOL
An indication of whether messages sent or received
on behalf of this user can be authenticated and if so,
which authentication protocol to use. The supported
values for this field are: usmNoAuthProtocol,
usmHMACMD5AuthProtocol, and
usmHMACSHAAuthProtocol. This is applicable if the
agent is configured to operate in SNMPv3.
varchar
16
AUTH_PASSWORD
The localized secret key used by the authentication
protocol for authenticating messages. This is
applicable if the agent is configured to operate in
SNMPv3.
varchar
64
PRIV_PROTOCOL
An indication of whether messages sent or received
on behalf of this user can be encrypted and if so,
which privacy protocol to use. The current values for
this field are: usmNoPrivProtocol and
usmDESPrivProtocol. This is applicable if the agent is
configured to operate in SNMPv3.
varchar
16
PRIV_PASSWORD
The localized secret key used by the privacy protocol
for encrypting and decrypting messages. This is
applicable if the agent is configured to operate in
SNMPv3.
varchar
64
TABLE 316
SNMP_DATA
Field
Definition
Format
Size
ID
Primary key column.
serial
MIB_OBJECT_ID
MIB Object ID.
int
TARGET_TYPE
Target type of the SNMP collector data. The target
type for,
•
device level collector is 0
•
port level collector it is 1.
num
(2,0)
TARGET_ID
Target id of the SNMP collector data. for device level
collector it will use deviceId, and for port level it will
use interfaceId.
int
VALUE
Value of the OID retrieved from the corresponding
target.
double
TIME_IN_SECONDS Time,
in
seconds, at which the record was inserted.
int
TABLE 315
SNMP_CREDENTIALS (Continued)
Field
Definition
Format
Size