Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 916)

868 Brocade Network Advisor SAN User Manual
53-1002948-01
High integrity fabrics overview
23
Deactivating high integrity fabrics
NOTE
Deactivating high integrity fabrics is not supported in a pure Fabric OS environment.
To deactivate a HIF, complete the following steps.
1. Select Configure > High Integrity Fabric.
The High Integrity Fabric dialog box displays ( Figure 381 ).
2. Select the fabric on which you want to deactivate HIF from the Fabric Name list.
The HIF status displays in the High Integrity Fabric field.
3. Click Deactivate.
Deactivating HIF on a fabric does not deactivate the features on the individual switches, you
must disable the SCC policy, Insistent Domain ID, and the Fabric Wide Consistency Policy for
SCC in tolerant mode individually: