Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 725)

Brocade Network Advisor SAN User Manual 677
53-1002948-01
Adding a switch to an encryption group
20
The Configuration Status dialog box displays. (Refer to Figure 293 .)
FIGURE 293 Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
7. Review important messages, then click Next.
The Error Instructions dialog box displays. (Refer to Figure 294 .) Instructions for installing
public key certificates for the encryption switch are displayed. These instructions are specific
to the key vault type.