Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 896)

848 Brocade Network Advisor SAN User Manual
53-1002948-01
Viewing General FCIP properties
22
Viewing General FCIP properties
Use the following steps to view general FCIP properties for a switch or blade.
1. Right click an Extension Blade or Switch from the Fabric Tree structure or on the Connectivity
Map, and select Properties.
2. Select the Properties tab.
FIGURE 370 General FCIP properties tab (Extension Switch or Blade)
Use the following steps to view the properties of a chassis where an Extension Blade is installed.
1. Right click the chassis in the Switch group in Fabric Tree structure or on the Connectivity Map
where the Extension Blade is installed, and select Properties.
2. Select the Properties tab.