Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 44)

xliv Brocade Network Advisor SAN User Manual
53-1002948-01
What’s new in this document
The following changes have been made since this document was last released:
• Information that was added:
- Dashboard
 Product Status and Traffic dashboard
 SAN Port Health dashboard
 IP Port Health dashboard
 Out of Range Violations widget (MAPS)
 Port Health Violations widget (MAPS)
 Flow vision monitors
 New performance monitors
 Expand navigation bar
 Network Scope
 Time Scope
- View Management - new status icons
- FCIP
 Logical switch function on FCIP Tunnels dialog box
 Connecting cascaded FICON fabrics over FCIP”
 Circuit Failover Grouping
 Logical switch function in FCIP Add Circuit dialog box
- FICON — Configuring a switch for FICON operation
- Flow Vision (SAN)
- Monitoring and Alerting Policy Suite (SAN)
- Private VLAN
- Report Template Manager (IP)
- Server Management console — Common Access Card Authentication (new)
- Performance — Performance database views
- Fault Management — Master Log filters
- Zoning — Support for LSAN tagging configured through the CLI (Management application
displays the tags)
FX8-24 Blade 1, 2 8 Gbps Extension Blade
1 Professional can discover, but not manage this device. Use the device’s Element Manager, which can be launched from the
Connectivity Map, to manage the device. This device cannot be used as a Seed switch.
2 Professional Plus Trial and Licensed version can discover, but not manage, this device. Use the device’s Element Manager, which can
be launched from the Connectivity Map, to manage the device. This device cannot be used as a Seed switch.
3 Only supported on the DCX 8510-4 and DCX 8510-8 chassis.
TABLE 1 Fabric OS-supported hardware (Continued)
Device name Terminology used in documentation Firmware level required