Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 1240)

Brocade Network Advisor SAN User Manual 1193
53-1002948-01
MAPS groups
34
MAPS groups
A MAPS group is a collection of similar objects that you can monitor as a single entity.
You can create a group of objects and then use that group in rules, thus simplifying rule
configuration and management. For example, you can create a group of UNIX ports, and then
create specific rules for monitoring this group.
Preconfigured groups
MAPS provides several preconfigured groups. You cannot edit or delete a preconfigured group. You
can add user-defined rules to the preconfigured groups. For more information, refer to
“Configuring
a MAPS policy” on page 1183.
Table 117 lists the preconfigured groups and their descriptions.
TABLE 117 Pre-configured groups
Pre-configured group name Element type Description
ALL_PORTS FC Port All FC ports physically present in the logical switch.
ALL_F_PORTS FC Port All F_Ports present in the logical switch, including all ports in F_Port trunks.
ALL_E_PORTS FC Port All E_Ports and EX_Ports present in the logical switch, including all ports in E_Port
and EX_Port trunks.
ALL_TARGET_PORTS FC Port All logical switch ports connected to targets. MAPS automatically detects if a device
connected on this port is a target port and adds it to this set.
ALL_HOST_PORTS FC Port All ports in the logical switch connected to hosts. MAPS automatically detects if a
device connected on this port is a server port and adds it to this set.
ALL_SFP FC Port All gigabit interface converters (GBIC) and SFP transceivers present in the logical
switch.
ALL_QSFP FC Port All QSFP transceivers present in the logical switch.
ALL_16GLWL_SFP FC Port All 16 Gbps Long Wavelength (LWL) SFP transceivers present in logical switch.
ALL_16GSWL_SFP FC Port All 16 Gbps Short Wavelength (SWL) SFP transceivers in logical switch.
ALL_10GLWL_SFP FC Port All 10 Gbps LWL SFP transceivers on FC ports in logical switch.
ALL_10GSWL_SFP FC Port All 10 Gbps SWL SFP transceivers on FC ports in logical switch.
ALL_SLOTS Slot All slots present in the chassis.
ALL_SW_BLADES Blade All port and application blades in the chassis.
ALL_CORE_BLADES Blade All core blades in the chassis.
ALL_PS Power Supply All power supplies present in the chassis.
ALL_TS Temperature Sensor All temperature sensors present in the chassis.
ALL_FAN Fan All fans present in the chassis.
ALL_CIRCUITS Circuit All FCIP circuits present in the logical switch.
SWITCH Switch Default group used to define rules on global parameters for the entire switch; for
example, security violations or fabric health.