Batch deployment for hybrid ports – H3C Technologies H3C Intelligent Management Center User Manual
Page 995
981
Batch deployment for hybrid ports
Using batch deployment for hybrid ports, you can configure one or more hybrid ports for an existing
VLAN.
To use batch deployment to configure hybrid ports for an existing VLAN:
1.
Navigate to VLAN Management > Batch Deploy:
a.
Click the Service tab from the tabular navigation system on the top.
b.
Click VLAN Management on the navigation tree on the left.
c.
Click the Batch Deploy link located under VLAN Management on the navigation tree on the left.
The Batch Deploy page appears.
2.
Click Hybrid ports option.
The window for batch deploying hybrid ports appears.
3.
Enter the port VLAN ID for the VLAN you want to add hybrid ports to in the PVID field.
4.
Enter the VLAN ID for the tagged VLAN in the Tagged VLAN field.
If you do not enter any value, all tagged VLAN IDs on the selected interfaces are cleared.
5.
Enter the VLAN ID for the untagged VLAN in the Untagged VLAN field.
If you do not enter any value, all untagged VLAN IDs on the selected interfaces are cleared.
The PVID as well as the Tagged, Untagged VLANs you enter in these fields must already exist on
all of the devices that you want to add hybrid ports from.
6.
Click Add to select the interfaces from which you want to add hybrid ports to the PVID you
specified in Step 2.
7.
Add interfaces by View or by the Advanced query method.
See "
Adding devices by Advanced query
the adding interfaces by view and query.
8.
Click OK.
9.
Review the results of your batch deploy configuration task in the Deploying Hybrid Ports Summary
Report that displays upon completion.