Unreachable device widget – H3C Technologies H3C Intelligent Management Center User Manual
Page 119
105
c.
Click
Configuration in the popup list.
The view configuration window appears.
2.
Drag the Important Device widget from the widget area to the panel.
3.
Right-click the Important Device widget and then select Parameter Configuration from the shortcut
menu.
The Select Object window appears.
4.
Filter devices by label or IP address:
a.
Enter a partial or full device label or IP address in the text box.
b.
Select Device.
c.
Click Search.
The results of your filter or search display in the device list.
If you do not set the criterion, the device list displays all devices in IMC.
5.
Select concerned devices from the filter results:
•
To add a device to the Selected Objects list, select the device in the device list and click
.
•
To add all devices to the Selected Objects list, click
. The selected devices cannot exceed
10. Otherwise, the Bind button is grayed out.
•
To remove a device from the Selected Objects list, select the device in the Selected Objects list and
click .
•
To remove all devices from the Selected Objects list, click
.
6.
Click Bind.
7.
Click Save Configuration .
Unreachable Device widget
Figure 71 Widget icon
The Unreachable Device widget displays the unreachable devices that contain the most unrecovered
alarms. Operators must specify how many unreachable devices they want to display.