H3C Technologies H3C Intelligent Management Center - Manual (Page 188)

174
35. Do one of the following:
{
Click the checkboxes to the left of Manageable Level 1 Location Views for which this operator
has management access and control, or
{
Click the checked boxes next to the Manageable Level 1 Location Views for which you want
to revoke operator access and control.
36. Click OK to accept the operator configuration.
Deleting an IMC operator
To delete an IMC operator:
1. Navigate to System > Operator:
a. Click the System tab from the tabular navigation system on the top.
b. Click Operator Management on the navigation tree on the left.
c. Click Operator under Operator Management from the navigation system on the left.
The Operator page is displayed with a list of all operators.
2. Click the Delete icon in the Operator list associated with the operator you want to delete.
3. Click OK to confirm deletion of the operator.
You cannot delete operators that are currently online nor can you ever delete the administrator account.
Sharing custom information between operators
Use this function to share custom information of an operator with another operator, including homepage
widgets and favorites. Make sure operators have permissions to view shared custom information.
To share custom information between operators:
1. Navigate to System > Operator:
a. Click the System tab from the tabular navigation system on the top.
b. Click Operator Management on the navigation tree on the left.
c. Click Operator under Operator Management from the navigation system on the left.
The Operator page appears and displays all operators in a list.
2. Click Copy Info.
The Copy Info page appears.
3. Select an operator from the Source Operator list.
4. Select an operator from the Destination Operator list.
5. Select one or more custom information entries in the Type area.
6. Click OK.
Modifying IMC passwords
Individual IMC operators manage their own passwords once the operator account has been established.
To change your password:
1. Navigate to System > Modify Password:
a. Click the System tab from the tabular navigation system on the top.
b. Click Operator Management on the navigation tree on the left.