H3C Technologies H3C Intelligent Management Center - Manual (Page 232)

218
7. If you set the Field Type to Integer or Up to five decimal digits, perform the following:
{
Enter the maximum value allowed for the additional information field in the Max. Allowable
Value field.
{
Enter the minimum value allowed for the additional information field in the Min. Allowable
Value field.
8. If you set the Field Type to Alphanumeric characters and {-_.@} only, or Any Characters, enter the
maximum length allowed for the additional information field in the Max. Length field.
9. If you set the Field Type to Custom options, you must configure option list contents.
To configure the option list contents:
a. To add an option to the Added Options list, enter the option in the Option field, and then click
Add. Repeat the above operations to add more options. The added options list must contain at
least one item.
b. To replace an existing option in the Added Options list with a new one, select the option, enter
the new option in the Options field, and then click Modify.
c. To delete a current option from the Added Options list, select the option and click Delete.
d. To adjust the position of an option in the Added Options list, select the option, click Up to move
the option one position up, or click Down to move the option one position down.
e. To set an existing option as the default setting for the additional information field, select the
option from the Added Options list, and then click Default.
10. Click OK.
Deleting a device additional information field
To delete a device additional information field:
1. Navigate to System > Device Additional Information:
a. Click the System tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click Device Additional Information under Resource Management from the navigation system
on the left.
The Device Additional Information List displays all device additional information fields in the
main pane of the Device Additional Information page.
2. Click the Delete icon for the additional information field you want to delete. A confirmation
dialog box appears.
3. Click OK.
Once an additional information field is deleted, IMC automatically deletes the additional information
from all existing devices.
Configuring data collection
When a network problem or an IMC failure occurs, you can use the data collection function to collect
information for troubleshooting. The data that can be collected includes:
• Device debugging information
• Device configuration file