H3C Technologies H3C Intelligent Management Center - Manual (Page 994)

980
2. Click Access ports option.
The window for batch deploying access ports appears.
3. Enter the port VLAN ID for the VLAN you want to add access ports to in the PVID field.
The PVID you enter in this field must already exist on all of the access devices that you want to add
access ports from. To add the PVID to one or more access devices, use the VLAN Batch Deploy
option. For more information about the VLAN Batch Deploy option, see " Batch deployment for
VLAN creation ."
4. Click Add to select the interfaces from which you want to add access ports to the PVID you
specified in Step 2.
5. Add interfaces by View or by the Advanced query method.
See "
Adding devices by View " and " Adding devices by Advanced query " which both function like
the adding interfaces by view and query.
6. Click OK.
7. Review the results of your batch deploy configuration task in the Deploying Access Ports Summary
Report that displays upon completion.
Batch deployment for trunk ports
Using batch deployment for trunk ports, you can configure one or more trunk ports for an existing VLAN.
To use batch deployment to configure trunk ports for an existing VLAN:
1. Navigate to VLAN Management > Batch Deploy:
a. Click the Service tab from the tabular navigation system on the top.
b. Click the VLAN Management on the navigation tree on the left.
c. Click Batch Deploy link located under VLAN Management on the navigation tree on the left.
The Batch Deploy page appears.
2. Click Trunk ports option.
The window for batch deploying trunk ports appears.
3. Enter the port VLAN ID in the PVID field.
The PVID you enter in this field must already exist on all trunk devices that you want to add trunk
ports from.
4. Enter the existing allowed VLAN ID in the Allowed VLAN field.
5. Click Add to select the interfaces from which you want to add trunk ports to the PVID you specified
in Step 2.
6. Add interfaces by View or by the Advanced query method.
See "
Adding devices by View " and " Adding devices by Advanced query " which both function like
the adding interfaces by view and query.
7. Click OK.
8. Review the results of your batch deploy configuration task in the Deploying Trunk Ports Summary
Report that displays upon completion.