Modify snmp settings – H3C Technologies H3C Intelligent Management Center User Manual
Page 335
321
1.
Click the Modify System Group Attributes link located under the Configure section of the right
navigation tree on the selected device's Device Details page. For information on navigating to a
device's Device Details page, see "
Viewing devices with Device, IP, and Topology Views
The modify System Group Attributes dialog box appears.
2.
Delete the existing system name in the System Name field and enter the new system name.
3.
Delete the existing contact information in the Contact field and enter the new system name.
4.
Delete the existing location information in the Location field and enter the new system name.
5.
Click OK.
In addition to numbers, letters, and spaces, the characters in
are valid entries for the
System Name, Contact, and Location fields.
Table 8 Valid Characters for Naming
Character Name
Character Name
~
Tilde
'
Apostrophe or single quotation
!
Exclamation mark
@
At sign
#
Pound sign
$
Dollar sign
% Percent
sign
^ Caret
& Ampersand
* Asterisk
( )
Parenthesis
=
Equal sign
+
Plus sign
|
Vertical bars
- Hyphen
_ Underscore
[ ]
Square brackets
{ }
Braces
: Colon
; Semicolon
\ Backslash
" Double
quotation
, Comma
/ Forward
slash
.
Dot
< >
Angle brackets
? Question
mark
Modify SNMP settings
You can also modify IMC SNMP settings for the selected device. Modifying the SNMP settings changes
the device's SNMP settings but does not change the SNMP settings on the managed device.
To modify IMC SNMP settings for the selected device from the Device Details page:
1.
Click the Modify SNMP Settings link located under the Configure section of the right navigation
tree on the selected device's Device Details page.
For information on navigating to a device's Device Details page, see "
The modify SNMP Parameters dialog box appears.
2.
Do one of the following:
{
To edit IMC configuration of the device's SNMP parameters, verify that the radio button to
the left of Edit SNMP Parameters is selected, or