H3C Technologies H3C Intelligent Management Center - Manual (Page 380)

366
IGMP snooping and GMRP are mutually exclusive. You cannot enable IGMP snooping while
GMRP is enabled.
VLAN management
IMC provides you with the ability to configure VLAN on managed devices. The VLAN Management
menu options are the shortcuts to the VLAN Management > VLAN Devices menu options located on the
left navigation tree under the Service tab. For more information about configuring VLAN for a specific
device, see " VLAN device management ."
Accessing the interface list and interface details page
From the Device Details page, you can navigate to the Interface Details page. From the Interface Details
page, you can view interface information including status and speed as well as perform interface related
actions.
There are many ways to access the Interface List. The most straightforward way to access the Interface
Details page is through the individual device's Device Details page.
To access the Interface List and Interface Details page:
1. Navigate to Resource > Device Name > Interface List.
a. Click the Resource tab from the tabular navigation system on the top.
b. Click View Management on the navigation tree on the left.
c. Click Device View under View Management from the navigation system on the left.
The Device List – All appears, listing all devices in IMC.
2. Locate the device you want to view interface details for and click the link in the Device Label column
in the Device List for the device you want to view interface details for.
The Device Details page appears.
3. Click the Interface List link in the Interfaces field of the Device Details section for the selected
device.
The Interface List appears, with all interfaces for the selected device shown in the main pane of the
page.
Interface list
• Interface Status: Contains an active icon indicating the current up/down status for the associated
interface.
• Interface Index: Contains a unique index for the associated interface.
• Interface Type: Contains the type of interface as defined by its physical/link protocol.
• Interface Description: Contains a description of the associated interface. The entry in the
description field serves as a link to the Interface Details page.
• Interface Alias: Contains the name of the interface that has been configured on the device. For
information on configuring interface alias, refer to the vendor's documentation.
• Interface IP: Contains the IP address of the associated interface.
• Mac Address: Contains the MAC address of the associated interface.
• Speed (bps): Contains the speed, in bits per second of the associated interface.
• Duplex Mode: Contains the duplex mode of the associated interface: Half, Auto, or Full.