Refresh, Snmp settings, Telnet settings – H3C Technologies H3C Intelligent Management Center User Manual
Page 415
401
Refresh
With the Refresh option, you can reload the current Device List page and capture any updates to device
details or other dynamic data found on this page. This feature is particularly useful when you use the
Synchronize option to query the selected device for updated information.
To refresh devices from the current view:
1.
Navigate to a Device List that contains the devices that you want to refresh.
For information on navigating to a Device List, see "
."
2.
Click the checkbox to the left of the devices you want to refresh from the selected view's Device
List.
3.
Click Refresh to refresh the selected devices.
The refreshed page appears.
SNMP settings
From the Device List, you can easily and quickly access IMC batch operations feature for configuring
SNMP settings for one or more devices.
To access IMC Batch Operation for SNMP settings for devices from the Device List:
1.
Navigate to a Device List that contains the devices that you want to configure SNMP settings for.
For information on navigating to a Device List, see "
."
2.
Click the checkbox to the left of the devices you want to manage the SNMP settings for from the
selected view's Device List.
3.
Click More.
4.
Select SNMP Settings from the list.
The Resource > Batch Operation > SNMP Settings page appears.
5.
Configure and apply the SNMP settings for batch mode operation.
For information on using batch operations in to configure multiple devices, see "
."
Telnet settings
From the Device List, you can easily and quickly access IMC batch operations feature for configuring
Telnet settings for one or more devices.
To access IMC Batch Operation for Telnet settings for devices from the Device List:
1.
Navigate to a Device List that contains the devices that you want to configure Telnet settings for.
For information on navigating to a Device List, see "
2.
Click the checkbox to the left of the devices you want to manage the Telnet settings for from the
selected view's Device List.
3.
Click More.
4.
Select Telnet Settings from the list.
The Resource > Batch Operation > Telnet Settings page appears.
5.
Configure and apply the Telnet settings for batch mode operation.
For information on using batch operations to configure Telnet settings on multiple devices, see
"