Open device panel, Open, Device panel – H3C Technologies H3C Intelligent Management Center User Manual
Page 332
318
3.
Enter commands in the field on the lower part of the Telnet/SSH Proxy window to interact with the
device.
4.
After you type the commands, click the
button to the right of the field or press Enter to send the
commands to the device.
Open device panel
The Device Panel provides you with a graphical view of HP, 3Com and H3C devices with the ability to
monitor and manage the device from the graphical view.
To access the graphical device panel for the selected device from the Device Details page:
1.
Click the Open Device Panel link located under the Action section of the selected device's Device
Details page.
For information on navigating to a device's Device Details page, see "
The Device Panel for the selected device displays in a new browser window, providing you with a
real time graphical rendering of the selected device. From the Device Panel, you can configure the
selected device as well as view configuration and other information.
Device panel navigation aids
•
Hovering the mouse over the blank area of the device panel displays a tip. The tip displays the
device label and the IP address.
•
Pointing to a component of the device displays component information.
•
A left click a port to select the port. Hovering the mouse over a port displays a tip. The tip displays
the port information, including the port description, port alias, and IP address. If no information is
configured for the port, the tip displays N/A.
•
A right-click the chassis to display the Chassis Menu for viewing device information or configuration
options. Information on the Chassis Menu can be found in the following section titled Device Panel
Chassis Menu.
•
A right-click a port from the device panel to display the Port Menu for viewing port information or
configuration options. Information on the Port Menu can be found in the following section titled
Device Panel Port Menu.
Device panel chassis menu
The Device Panel Chassis menu can be accessed by right-clicking the chassis itself from the Device Panel.
This section provides an overview of the information and configuration options of the Chassis Menu.
•
Device Information: From this menu option, you can:
{
View some or all of information in the following areas depending on the device type selected.
{
Configure the selected device.
{
Perform Port Mode Switch, Port Aggregation, Reset Device, Save Device Configuration, Mpu
Switch, Port Mirror, Address Binding, Environment Monitor, RMON, Config Interface 802.1X
Status and RADIUS Server Configuration.
•
Protocol Management: From this menu option, you can view information in the following areas (the
areas vary with the device model):
•
OSPF: OSPF Attribute, Area Information, Stub Area Information, LSDB Information, Extended LSDB
Information, OSPF Interface, Interface ToS Metric, Peer Information, Virtual Link Interface and
Virtual Link Peer.
•
MSTP: Global MSTP, MSTI, and Port MSTP.