H3C Technologies H3C Intelligent Management Center - Manual (Page 593)

579
Column heading Description Required
ConfigPara
Parameters in the configuration file to be deployed.
The parameters are in the format of Parameter name1: Parameter
value1; Parameter name2: Parameter value2; ...For example,
ACLNumber: 3005.
No
CurrentDeviceIp Current IP address of the device.
At least
one of
them is
required.
MACAddress MAC address of the device.
UnitId
Stack member ID, ranging from 1 to 9. A value of –1 indicates that
the stack feature is disabled on the device.
No
changDeviceInfo
Indicates whether or not the device information is different from that
in the existing configuration file on the device. The value can be:
• 0 for no
• 1 for yes
No
DeviceName Device label. No
DeviceGroup Device group. No
DeploySoft Software to be deployed on the device. No
CLIScript Name of the CLI script to be deployed on the device. No
CLIPara
Parameters in the CLI script file to be deployed.
The parameters are in the format of Parameter name1: Parameter
value1; Parameter name2: Parameter value2; ...For example,
ACLNumber: 3005.
No
changSnmpPara
Indicates whether or not the device's SNMP parameters are
different from those in the existing configuration file on the device.
The value can be:
• 0 for no
• 1 for yes
No
SnmpParaVersion
SNMP version. The value can be:
• 1 for SNMPv1
• 2 for SNMPv2c
• 3 for SNMPv3
No
SnmpParaRead
Read-only community name, which is public by default and contains
32 characters at most.
No
SnmpParaWrite
Read and write community name, which is private by default and
contains 32 characters at most.
No
SnmpParaSecurityUser
Username, which applies to only SNMPv3 and contains 32
characters at most.
A username corresponds to a SNMPv3 template name.
No
SnmpParaContextName SNMPv3 context name, which contains 32 characters at most. No