H3C Technologies H3C Intelligent Management Center - Manual (Page 364)

350
IMC displays all RMON stat group entries in the Stat Group List displayed in the main pane of the
RMON Stat Group page.
3. Click the checkbox associated with the ports or interfaces you want to remove from RMON
Statistics Group collection.
4. Click Delete.
5. Click OK to confirm deletion of the selected interfaces.
Managing the RMON history group
The RMON History group defines the sampling configuration for one or more monitored interfaces. From
the RMON History group configuration window, you can configure the sampling rate for selected
interfaces.
Viewing RMON history group details
To view RMON History Group details for the selected device from the Device Details page:
1. Click the RMON link located under the Device Management section of the right navigation tree on
the selected device's Device Details page.
2. Click the History Group tab located at the top of the RMON Stat Group page.
IMC displays all RMON history group entries in the History Group List displayed in the main pane
of the RMON History Group page.
History group list fields and explanations
• Index: Contains unique index values for the associated history collection instance. If a MIB object
contains more than one entry, indexes are used to uniquely identify each entry.
• Port: Contains port name/description for the associated interface.
• Configured Max Samples: Contains the maximum number of samples that are collected and
retained for viewing for the given metrics.
• Actual Max Samples: When the Configured Max Samples is less than the max samples supported
by the device, the Actual Max Samples are the same as the Configured Max Samples. When the
Configured Max Samples is greater than the max samples supported by the device, the Actual Max
Samples is the max number supported by the device.
• Sampling Interval (second): Contains the amount, in seconds, of time between polls.
• Owner: C ontains the name of the owner of the RMON statistics collection that is configured when
you add the interface to History Group collection.
• Status: Indicates whether or not the history collection is active for this interface.
If the RMON History Group List contains multiple entries, the following navigational aids may
appear:
{
Click to page forward in the History Group list.
{
Click to page forward to the end of the History Group list.
{
Click to page backward in the History Group list.
{
Click to page backward to the front of the History Group list.
3. Click 8, 15, 50, 100, or 200 from the right side of the main pane to configure how many items
per page you want to view.
You can only view devices that they have been granted management access to.
Adding RMON history group entries