H3C Technologies H3C Intelligent Management Center User Manual
Page 845
831
•
Match Order: Contains the match order type for the associated rule. The Match Order can either be
Config or Auto.
•
Rule Set Description: Contains a description for the associated Rule Set.
Rule info for basic ACL
•
No.: Contains the sequence or rule number for the associated rule in the Rule Set. The value in the
sequence field serves as a link for navigating to the Rule Info page for the associated rule. This
page displays rule configuration information for the associated rule. For more information about
viewing rule information, refer to the section of this manual on "
•
Action: Contains the access control action specified in the associated rule. Actions include permit
and deny.
•
Source Address: Contains the source address specified in the associated rule for which the action
is taken. For example, if the action is to permit IP traffic, this field identifies the source IP address
from which IP traffic is permitted.
•
Rule info for Advanced ACL
•
No.: Contains the sequence or rule number for the associated rule in the Rule Set. The value in the
sequence field serves as a link for navigating to the Rule Info page for the associated rule. This
page displays rule configuration information for the associated rule. For more information about
viewing rule information, see "
•
Action: Contains the access control action specified in the associated rule. Actions include permit
and deny.
•
Protocol: Contains the protocol specified in the associated rule for which the action is taken.
•
Source Address: Contains the source address specified in the associated rule for which the action
is taken. For example, if the action is to permit IP traffic, this field identifies the source IP address
from which IP traffic is permitted.
•
Destination Address: contains the destination address specified in the associated rule for which the
action is taken. For example, if the action is to permit IP traffic, this field identifies the destination IP
address to which IP traffic is permitted.
Rule info for link ACL:
•
No.: Contains the sequence or rule number for the associated rule in the Rule Set. The value in the
sequence field serves as a link for navigating to the Rule Info page for the associated rule.
This page displays rule configuration information for the associated rule. For more information
about viewing rule information, see "
•
Action
: Contains the access control action specified in the associated rule. Actions include permit
and deny.
•
Source MAC Addr: Contains the source MAC address specified in the associated rule for which the
action is taken.
•
Destination MAC Addr: Contains the destination MAC address specified in the associated rule for
which the action is taken.
Rule info for user-defined ACL:
•
No.: This field contains the sequence or rule number for the associated rule in the Rule Set. The value
in the No. field serves as a link for navigating to the Rule Info page for the associated rule. This
page displays rule configuration information for the associated rule. For more information about
viewing rule information, see "
•
Action: Contains the access control action specified in the associated rule. Actions include permit
and deny.