Save configuration, Reboot device, Add to device group – H3C Technologies H3C Intelligent Management Center User Manual
Page 417
403
5.
Configure and apply the Poll Interval settings for batch mode operation.
For information on using Batch Operations to configure polling intervals on multiple devices, see
"
Using batch mode to configure polling intervals
."
Save configuration
You can also save the configurations of one or more managed devices using IMC batch operations
feature accessed from the Device List. This function is equivalent to executing the Save command on
devices.
To save the configuration for one or more devices from the Device List using batch operations:
1.
Navigate to a Device List that contains the devices that you want to save the configuration of.
For information on navigating to a Device List, see "
."
2.
Click the checkbox to the left of the devices you want to save the configuration of from the
selected view's Device List.
3.
Click More.
4.
Select Save Configuration from the list.
The Resource > Batch Operation > Save Configuration page appears.
5.
Configure and apply the Save Configuration settings for batch mode operation.
For information on using Batch Operations to save the configuration of multiple devices, see
"
Using batch mode to save device configurations
."
Reboot device
You can also reboot one or more devices using IMC batch operations feature accessed from the Device
List.
To reboot one or more devices from the Device List using batch operations:
1.
Navigate to a Device List that contains the devices that you want to reboot.
For information on navigating to a Device List, see "
2.
Click the checkbox to the left of the devices you want to reboot from the selected view's Device
List.
3.
Click More.
4.
Select Reboot Device from the list.
The Resource > Batch Operation > Reboot Device page appears.
5.
Configure and apply the Reboot Device settings for batch mode operation.
For information on using Batch Operations to reboot multiple devices, see "
Add to Device Group
You can add devices to different device groups to aid management.
To add one or more devices to a device group:
1.
Navigate to a Device List that contains the devices that you want to monitor.
For information on navigating to a Device List, see "
2.
Click the checkbox to the left of the devices you want to add to a device group from the selected
view's Device List.
3.
Click More.