H3C Technologies H3C Intelligent Management Center - Manual (Page 869)

855
{
ACLs can have a profound effect on the performance of networks. ACL Management
automatically evaluates the effectiveness of rules and their effect on overall network
performance as you add rules to a rule set. You can also manually perform an analysis of a rule
set and optimize its effect on network performance using the Optimize feature. For more
information about using this feature, see " Optimizing the rules in a rule set ."
{
To delete one or more rules from a rule set, see " Deleting rules from an ACL rule set ."
23. Click Finish when you have finished modifying this rule set.
Modifying a user-defined rule set
To modify the user-defined rule set of an existing ACL:
1. Navigate to ACL Resource:
a. Click the Service tab from the tabular navigation system on the top.
b. Click ACL Management section of the navigation tree on the left.
c. Click the ACL Resource link located under ACL Management on the navigation tree on the left.
The ACL Resource list displays in the main pane of the ACL Resource page.
2. Click the ACL Identifier for the basic ACL for which you want to modify a rule. Refer to the ACL Type
field in the ACL Resource list for identifying ACLs for which the type is User-Defined.
The Rule Set List for the selected ACL displays in the main pane of the ACL Resource > Resource Name (ACL Identifier)> page.
3. Click the icon in the Modify field associated with the rule set you want to modify.
The Basic Info step of the Modify Rule Set page appears.
Several fields cannot be changed. These include the ACL Identifier, the ACL Type, the ACL Resource
Name, the Rule Set Name, and the Match Order.
4. Modify the description for this ACL as needed in the ACL Description field.
A valid length for this field is 0 – 127 characters.
5. Modify the description for this rule set as needed in the Rule Set Description field.
A valid length for this field is 0 – 127 characters.
6. Click Next.
The Configure Time Range step of the Modify Rule Set page appears.
7. Do one of the following:
{
If you do not want to modify or add a time range, click Next and skip to Step 8.
{
If you want to modify an existing time range, click on the icon in the Modify field of the time
range table, the Modify Time Range page appears.
{
Modification options include adding new time ranges or deleting existing time ranges.
Enter a new name for the time range in the Name field of the Modify Time Range page to modify
the time range name.
Time Range names must begin with a letter [A-Z] and consist of 1-32 characters. Blank spaces [ ]
and question marks [?] are not permitted. Uppercase letters may be converted to lowercase letters
by some devices after deployment.
• To configure a new time range item, click Add under the Time Range Items section and the Add
Time Range dialog box appears. Follow the instructions below:
a. Select the type of time range you want to create by clicking the radio button to the left of the
desired time range type.