H3C Technologies H3C Intelligent Management Center - Manual (Page 100)

86
2. Enter the view name. The default name is New View. The name string ranges from 1 to 32
characters, and can be the same as that of an existing view.
3. Click OK.
Deleting a view
To delete the current view:
4. Click Delete View .
5. Click Yes in the dialog box that appears.
Saving modifications to all views
Click Save Configuration to save modifications to all views.
If a view contains overlapping widgets, IMC displays a conflict message. Adjust the widget positions and
click Save Configuration again.
Managing widgets
You can select the widgets to be loaded for view configuration. By default, the view configuration view
can load 17 widgets from the IMC Platform, 13 of which are for resource management, 3 of which are
for performance management, and 1 of which is for alarm management. For more information about the
modules, see "
Configuring widgets ." When other service components are deployed, more widgets are
loaded.
To manage widgets:
1. Click Widget Management .
The widget management window appears, including these parameters:
• Widget Name: Name of the widget.
• Category: Name of the IMC Platform component or service component to which the widget
corresponds.
2. Select the boxes to the left of the names for the widgets to be loaded, or select the box to the left
of the Widget Name column to select all widgets.
3. Click Save.
The widget management window is closed. IMC loads only the selected widgets for the view
configuration.
4. Click Reload to load all widgets again.
Refreshing all views
Click Refresh to refresh the current and all other views.
IMPORTANT:
Save any modifications to the views before you refresh them. Otherwise, you lose all modifications.
Setting widget properties
Select a widget and then set the following parameters in the command area: