H3C Technologies H3C Intelligent Management Center - Manual (Page 498)

484
str.telnet.user.password=Password
str.telnet.user.password.info=No longer than 32 characters.
str.telnet.user.level=User Level
str.telnet.user.service.type=Service Type
The following describes properties supported by the elements in the file.
Operations
The Operations element is the root node of the operation definition file in Table 9 .
Table 9 Properties supported by the Operations element
Property
name
Description Required Remarks
devCapability
Device
capability set
supported by the
component
N
• The capability set must be defined in the
name>_devCapabilities.xml file or be ALL (which means
supports all devices).
• It is ALL by default.
• devCapability="" means not support any device.
• The values of devCapability can be the capability sets
defined in the _devCapabilities.xml
file, separated by colons (,).
Example:
Variable
The Variable element, shown in Table 10 is used to define a variable. The consequent operation
definitions can reference the variable in the format ${}.
The user-defined variable takes precedence over the system-defined variable.
For more information about replaceable variables, see later sections.
Table 10 Properties supported by the Variable element
Property
name
Description Required Remarks
Name Variable name Y
The value can contain only letters, digits, underlines (_),
and dots (.).
Value Variable value Y N/A
Example:
Operation
Operations can contain multiple operation definitions, each of which defines a service operation
in Table 11 .