H3C Technologies H3C Intelligent Management Center - Manual (Page 583)

569
3. Click the icon with the deployment plan you want to expand.
{
When the Undeployed Devices Only box is not selected, all existing devices in the deployment
plan are displayed.
{
When the Undeployed Devices Only box is selected, only the devices on which the deployment
plan has not been deployed are displayed.
Automatic deployment device list
• MAC Address: displays the MAC address of the device.
• Current IP Address: displays the current IP address of the device.
• Target IP Address/Mask: displays the IP address and mask of the device after the deployment plan
is successfully executed on it.
• Running Status: Contains the execution result of the deployment plan on the device.
• Operation: Contains the following icons for managing the deployment device:
{
This icon modifies the deployment information for the device.
{
This icon views detailed information about the deployment plan on the device.
{
This icon views the execution result of the deployment plan on the device.
{
This icon manually triggers a deployment plan on the device.
{
This icon deletes the device.
Adding an automatic deployment plan
To add an automatic deployment plan:
1. Navigate to Service > Auto Deployment Plan.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Configuration Center on the navigation tree on the left.
c. Click the Auto Deployment Plan under Configuration Center from the navigation system on the
left.
All existing automatic or scheduled deployment plans is displayed in the Auto Deployment Plan
page.
2. Click Add.
The Auto Deployment Plan dialog box appears.
3. Enter a unique name for this deployment plan in the Name field.
Valid name length is 1–32 characters.
4. Enter a brief description for this deployment plan in the Description field.
Valid description length is 0–128 characters.
5. Click OK to accept your deployment plan configuration.
Review the results of the add operation in the Auto Deployment Plan page.
Modifying an automatic deployment plan
To modify an existing automatic deployment plan:
1. Navigate to Service > Auto Deployment Plan.
a. Click the Service tab from the tabular navigation system on the top.
b. Click Configuration Center on the navigation tree on the left.
c. Click Auto Deployment Plan under Configuration Center from the navigation system on the left.