H3C Technologies H3C Intelligent Management Center User Manual
Page 406

392
•
Profile Name: Select the server profile file created on the HP VC device. IMC deletes all Ethernet
connections in this file.
Add FC SAN Connection
•
Profile Name: Select the server profile file created on the HP VC device. This option is required.
•
Fabric: Enter the fabric name created on the HP VC device.
•
Speed: Select the speed of the port. Options include Auto, 1G, 2G, 4G, 8G, and Disabled. The
default is Auto.
•
Address Type: Select the WWN address type of the port or node. Options include Factory-Default
and User-Defined. If you do not configure this option, the device automatically assigns a WWN
address to the port or node from a specified address pool. If Factory-Default is selected, the device
uses the factory-default WWN address. If User-Defined is selected, assign a WWN address to the
port or node by configuring the Port WWN or Node WWN parameter.
•
Port WWN: Enter a hexadecimal WWN address for the port, in the format of FF-FF-FF-FF-FF-FF-FF-FF.
•
Node WWN: Enter a hexadecimal WWN address for the node, in the format of
FF-FF-FF-FF-FF-FF-FF-FF.
Delete FC SAN Connection
Profile Name: Select the server profile file created on the HP VC device. IMC deletes all FC connections
in this file.
Add FCoE Connection
•
Profile Name: Select the server profile file created on the HP VC device. This option is required.
•
Fabric: Enter the fabric name created on the HP VC device.
•
Speed: Select the speed of the port. Options include Auto, 1G, 2G, 4G, 8G, Custom, and Disabled.
The default is Auto.
•
Custom Speed: Set the speed of the port, which must be an integer ranging from 100 to 10000 in
MBps. This option is available only when Custom is selected in Speed.
•
WWN Type: Select the WWN address type of the port and node. Options include Factory-Default
and User-Defined. If you do not configure this option, the device automatically assigns a WWN
address to the port or node from a specified address pool.
If Factory-Default is selected, the device uses the factory-default WWN address. If User-Defined is
selected, assign a WWN address to the port or node by configuring the Port WWN or Node WWN
parameter.
•
Port WWN: Enter a hexadecimal WWN address for the port, in the format of FF-FF-FF-FF-FF-FF-FF-FF.
•
Node WWN: Enter a hexadecimal WWN address for the node, in the format of
FF-FF-FF-FF-FF-FF-FF-FF.
•
MAC Address Type: Select the MAC address type of the NIC or port. Options include
Factory-Default and User-Defined. If you do not configure this option, the device automatically
assigns an address string to the NIC or port from a specified address pool. If Factory-Default is
selected, the device uses the factory-default MAC address. If User-Defined is selected, assign a
MAC address to the NIC or port by configuring the Ethernet MAC parameter.
•
Ethernet MAC: Enter an Ethernet MAC address. If you select User-Defined in Address Type, this
option is required.
Delete FCoE Connection
Profile Name: Select the server profile file created on the HP VC device. IMC deletes all FCoE
connections in this file.