H3C Technologies H3C Intelligent Management Center - Manual (Page 512)

498
info="%str.vlan.id.info" />
When dynamically generating a page, the system does not generate the view for parameters using
replaceable variables in the value property.
The system dynamically assigns a value to the parameter based on the replaceable variable when
executing actions for the operation and you do not need to enter a value. Replaceable variables can also
be used in the control initialization process.
The control initialization action is executed after the dynamic page is generated. Such actions do not
require manual input of parameters. The control initialization action parameters can only be the dynamic
information, such as the selected port or device. At this time, the service component requires using
replaceable variables. When the system performs control initialization, it replaces the replaceable
variables with the corresponding device or port information, shown in Figure 91 .
Figure 91 System-level replaceable variable supported by the common configuration framework
Category Parameter name
Parameter
description
Remarks
System-level
variables
IMC_SERVER_IP
IMC primary
server IP address
N/A
IMC_HTTP_PORT
IMC HTTP port
number
N/A
IMC_HTTPS_PORT
IMC HTTPS port
number
N/A
IMC_USER_NAME
Current IMC user
name
N/A
IMC_USER_PWD
Current IMC user
password
N/A
Device-level
variables
DEVICE_ID Device ID
Same as the returned value of getDeviceID()
for SymbolInfo.
You can get other device properties by
using this property.
SYMBOL_ID Symbol ID
Same as the returned value of getSymbolID
() for SymbolInfo.
DEVICE_IP Device IP address
Same as the returned value of getIpAddress
() for SymbolInfo.
DEVICE_SYSOID Device sysOID
Same as the returned value of getSysOID ()
for SymbolInfo.
Interface-level
variables
IF_INDEX Interface index
Same as the returned value of
getId().getIfIndex() for IfInfo.
You can get other interface properties by
using this property.
IF_DESC
Interface
description Same as the returned value of getDesc () for
IfInfo.
IF_TYPE Interface type
Same as the returned value of getType () for
IfInfo.